Which Are the Correct Maintenance Methods for Household Refrigerators?

Which Are the Correct Maintenance Methods for Household Refrigerators?

In modern households, the refrigerator is one of the indispensable appliances, providing great convenience for keeping our food fresh. However, to keep the refrigerator in good working condition and extend its service life, the correct maintenance methods are crucial. The following is a detailed introduction to the correct maintenance methods for household refrigerators for you.

Home refrigerators can store a variety of foods

 Regular Cleaning

After the refrigerator has been used for a period of time, dirt and odors will accumulate inside. It is recommended to conduct a comprehensive cleaning of the refrigerator every 1-2 months. First, unplug the power plug and take out all the food in the refrigerator. Then, wipe the shelves, drawers, inner walls and other parts inside the refrigerator with warm water and neutral detergent. For stubborn stains, you can use specialized cleaners, but be careful to avoid using highly corrosive chemicals. After cleaning, dry it with a clean damp cloth and put the food back into the refrigerator.

Proper Placement of Food

Placing food correctly can not only keep the inside of the refrigerator tidy but also benefit the preservation of food. Raw and cooked foods should be stored separately to avoid cross-contamination. The temperature in the refrigerating compartment is generally 2-8°C, suitable for storing vegetables, fruits, beverages, etc.; the temperature in the freezing compartment is usually below -18°C, suitable for storing meat, seafood, ice cream, etc. Also, do not put hot food directly into the refrigerator to avoid affecting the refrigeration effect and increasing power consumption.

Pay Attention to Defrosting

If your refrigerator is not a frost-free one, regular defrosting is essential. When the frost layer in the refrigerator reaches about 5 millimeters thick, defrosting operations should be carried out. First, take out the food in the refrigerator, then unplug the power plug, open the refrigerator door and let the frost melt naturally. You can also use the low-temperature gear of a hair dryer to accelerate the melting of the frost, but be careful not to blow against the plastic parts inside the refrigerator to avoid damage. After defrosting is completed, dry the inside of the refrigerator with a dry cloth, plug in the power again and put the food back into the refrigerator.

Check the Door Seal

The door seal is a key component to ensure the sealing performance of the refrigerator. If the door seal is aged or deformed, it will cause the cold air in the refrigerator to leak and increase power consumption. You can insert a piece of paper between the refrigerator door and the cabinet. If the paper can be easily pulled out, it indicates that the door seal needs to be replaced or adjusted. Wipe the door seal with a damp cloth regularly to remove dirt and foreign objects on it and maintain its good elasticity.

Avoid Overloading

Do not place too much food in the refrigerator to avoid affecting the air circulation and reducing the refrigeration effect. Generally speaking, the amount of food placed in the refrigerator should not exceed 80% of the volume. At the same time, be careful not to block the ventilation openings of the refrigerator to ensure the normal circulation of cold air.

Regular Inspection

Regularly check whether the refrigeration effect and operation sound of the refrigerator are normal. If abnormal situations such as poor refrigeration effect and increased noise are found, contact professional maintenance personnel for inspection and repair in time.

In conclusion, the correct maintenance methods can enable the household refrigerator to serve us better. I hope these maintenance methods can help you extend the service life of the refrigerator and make your life more convenient and healthy.